Flash Flood Cleanup Cost Calculator
Enter the size of the wet area and what got wet to see a typical national price range for storm flood cleanup and drying. It is an estimate only; the real price comes from the walkthrough.
Estimate the Cost
Typical range: $750 to $1,400
How it works: typical national figures of about $3.75 to $7 per square foot for clean water, $4.50 to $8.50 for gray water and $7 to $13 for black water, multiplied by 1.25 to 1.7 for drywall, ceilings, hardwood or finished basements and by 1.25 when the water sat for more than two days, with a small-job minimum. Pipe repair and rebuild are not included. Estimate only, not a quote.
Get contaminated water removed (888) 563-9619
What Does Flash Flood Cleanup Cost?
Typical national water damage mitigation often runs about $1,400 to $6,400, while extensive contaminated flooding can exceed that range. The actual scope depends on water depth, area, contamination, material removal and drying time.
- Typical national restoration project: $1,400 to $6,400. A broad national benchmark for water mitigation; widespread flooding and reconstruction can cost more.
- Clean water comparison: $3 to $4 per square foot. A typical mitigation benchmark for clean-source water, included only to show why outside floodwater differs.
- Gray water comparison: $4 to $6.50 per square foot. A typical mitigation benchmark for moderately contaminated water, below most outside flood conditions.
- Category 3 mitigation benchmark: $7 to $7.50 per square foot. A typical national benchmark before separate rebuilding costs or unusually large removal work.
What changes the price
- Square footage and depth of standing water
- Amount of sediment and contaminated porous material
- Wet wall, floor and insulation layers that require opening
- Length of saturation before extraction and controlled drying begin